Channel Buttons; Menu Button; Power Button - ProScan Monitor/Receiver Owner's Manual

R e m o t e C o n t r o l :
Operating Remote Control
Before attempting to operate either one of the remote controls,
install the batteries as shown below.
Installing/Replacing Batteries
1 Turn the remote control face down.
2 Press down on the ridged area of each battery cover and slide
it off.
3 Install the batteries in the compartment as shown.
4 Replace the cover and turn remote over (face up).
Notes: Replace the batteries when the TV fails to respond to the remote
control.
If you programmed the master remote to control other components, you
may have to reprogram the code numbers when you change batteries.
Try not to press any buttons while changing batteries.
Never place anything heavy on top of the remote control or lay it upside-
down. This may accidentally depress the buttons for a long time and
discharge the batteries.
Do not mix new and used batteries or different brands of batteries.
4
T V F u n c t i o n s
Effective Range of Remote Controls
Aim the remote control at your TV's remote control sensor.
The remote control produces an invisible (infrared) beam that
travels in a straight line much as the beam of a flashlight. For
this reason, when operating the remote control, you must
point it directly at the front of the TV without objects
between that can block the infrared light beam.
Simplified Remote
This remote can be used to operate the basic functions of
your TV.

CHANNEL BUTTONS

Press
CHANNEL
channel in memory or press
to select next lower channel. You can add
and erase channels in memory as desired.
CHAN
Details are on page 22.
VOLUME BUTTONS (ALSO + AND – BUTTONS)
CHAN
Press up to increase volume and press
VOL
down to decrease volume.
MENU
VOL
Also use these buttons after you have
pressed the
MENU
functions. Details begin on page 12.

MENU BUTTON

Press repeatedly until the menu you
MENU
want to display is selected, then press
or down.
Next press
MENU
function you want to adjust and then press
up or down to adjust the setting. Details
VOL
begin on page 12.

POWER BUTTON

Turns off the TV. Also turns some VCRs
off and on.
TV BUTTON
Turns TV on and puts the remote in TV
mode. Also displays channel information.
Aim remote at your TV's remote
control sensor.
up to select next higher
down
CHANNEL
button to enter or adjust
up
VOL
repeatedly to select the