Speakers On/Off - ProScan Monitor/Receiver Owner's Manual

A u d i o M e n u : B a s i c F u n c t i o n s
1. Repeatedly
press MENU to
Mute
select AUDIO
Video Menu
MENU.
Audio Menu
Setup Menu
3. Repeatedly press
MENU to select a Treble
Bass
function, then press +
Balance
or – to adjust it. Stereo/SAP: Stereo
Expand Stereo: Off
Speakers: Off
Pressing moves down the screen (one item per press).
MENU
The audio menu will automatically disappear from the
screen if you do not press + or – within a few seconds.
Via remote control, your TV will "remember" which
function you displayed last, even after the menu has
disappeared from the screen. So, if you want to adjust the
same function again, simply press the + or – button on the
remote control. The last function you adjusted will
reappear on the TV screen.
12
2. Then press + or – to
display the audio menu.
–........|........+
–........|........+
MENU
–........|........+
TREBLE adjusts the high frequency audio. Press + to increase
treble, or press – to decrease treble.
BASS adjusts the low frequency audio. Press + to increase bass, or
press – to decrease bass.
BALANCE adjusts the left/right balance of sound from the speakers.
When adjusting the balance, sit in your normal viewing seat while
pressing the + or – button until the sound seems to originate from
a point halfway between the speakers.
STEREO/SAP
lets you choose either monaural or stereo audio, or
SAP audio (when it is available) by pressing the + or – button.
Normally, you can leave this function set to
will automatically produce either monaural or stereo audio
whichever is broadcast. Details about stereo and SAP are on
page 13.
EXPANDED STEREO can be turned
This feature adds greater depth and dimension to stereo
broadcasts. You will probably want to leave this function turned
so your TV will automatically expand the stereo signals
ON
whenever a stereo broadcast is received (or whenever a stereo tape
is played though a stereo VCR connected to the TV's audio/video
jacks labeled ). Details about expanded stereo are on
INPUT
page 14.

SPEAKERS ON/OFF

lets you turn off the TV's speakers by pressing
+ or –. You will probably want to leave the TV's speakers turned
on unless you connect an amplifier (with its own set of speakers)
to the appropriate jacks on the back of the TV as described on
page 46. Turning this function off, turns off not only the TV's
internal speakers but also any external or surround speakers
connected to the TV's speaker terminals. Sound will then only
come through the speakers connected to the amplifier, since the
TV's speakers are turned off.
, and your TV
STEREO
or by pressing + or –.
ON OFF