Changing Antenna Input - ProScan Monitor/Receiver Owner's Manual

S e t u p M e n u : B a s i c F u n c t i o n s c o n t i n u e d

Changing Antenna Input

Your TV has two separate antenna inputs on the back
(labeled and ) that allow you to connect two
ANT A ANT B
different signal sources if desired. For example, you can
connect a cable-TV system to one input and a home
antenna to the other input.
By pressing the button on the remote control, you
ANTENNA
can switch back and forth between the two signal sources.
Listed below are some other common uses of the two
antenna inputs:
1 Connecting a cable-TV system (or antenna) to one input and a
VCR to the other.
2 Connecting a cable-TV system (or antenna) to one input and a
video game to the other.
3 Connecting a double-trunk cable system to both inputs.
4 Connecting a cable-TV converter/decoder box that scrambles
only premium channels and cannot be controlled by remote
control. Connection details are on pages 39-40.
The Channel Memory is the list of channel numbers your
TV will stop on when you press the
buttons. Your TV provides two separate channel memories
(one for input and one for
ANT A
you to add or delete channels into each channel memory as
desired.
When you use the
AUTOPROGRAM
automatically checks both inputs and sets up a separate
channel memory for each.
Changing Antenna Input
with remote
1 Press the
button on the remote control to switch
ANTENNA
from input to input. The color of the channel
ANT A ANT B
numbers will change from blue to yellow to let you know you
are now watching whatever signal is connected to the
connector on the back of the TV.
21
2 Press the
button again to switch back to
ANTENNA
color of the channel numbers will change back to blue to let
you know you are now watching whatever signal source is
connected to the connector.
ANT A
24
up or down
CHANNEL
input). This allows
ANT B
function, the TV
ANT B
blue for
ANT A
yellow for
ANT B
. The
ANT A
Changing Antenna Input
without remote
1 Repeatedly press the
button to select
MENU
then press + to display the setup functions.
Mute
Video Menu
Audio Menu
Setup Menu
2 Repeatedly press the
button to select
MENU
12
Chan Ctrl: Normal
Parental Ctrl: Off
Autoprogram
Chan Mem: Stored
Antenna: A
3 Press the + or – button to change the setting. The screen
display will change from to
A
watching whatever signal is connected to the
connector on the back of the TV.
12
Chan Ctrl: Normal
Parental Ctrl: Off
Autoprogram
Chan Mem: Stored
Antenna: B
4 Press the + or – button again to switch back to
screen display will change to
are now watching whatever signal source is connected to the
connector on the back of the TV.
ANT A
12
Chan Ctrl: Normal
Parental Ctrl: Off
Autoprogram
Chan Mem: Stored
Antenna: A
R e m o t e
and
SETUP MENU
.
ANTENNA: A/B
blue for
ANT A
to let you know you are now
B
ANT B
yellow for
ANT B
. The
ANT A
to let you know you
ANTENNA: A
blue for
ANT A