ProScan Monitor/Receiver Owner's Manual page 29

R e m o t e C o n t r o l F u n c t i o n s
Cable Box Channel Setup
The function lets you program to which channel
CABLE CHAN
the TV will automatically tune when you press the
button on the remote. This is handy if you have
DSS•CABLE
to connect a cable box to your TV. You will no longer
have to remember the output channel of the cable box
because the TV will remember for you.
For example, if you connect a cable box to the TV's
connector (as shown on page 37), you will
CABLE/ANTENNA
no longer have to remember to select channel 2, 3, or 4 on
the TV to see what's coming from the cable box. By
entering the cable box's output channel (usually 02, 03, or
04) next to the function, the TV will
CABLE CHAN
automatically tune to that channel each time you press the
button on the remote.
DSS•CABLE
This function is especially convenient if you have a
remote-controllable cable box that can be operated by the
button on the remote as described on page 41.
DSS•CABLE
Pressing the button will then not only switch the
DSS•CABLE
remote to cable mode but will also automatically tune the
TV to the proper channel for viewing the picture from the
cable box.
Setting Up Cable Box Channel
with or without remote
1 Repeatedly press the
button to select
MENU
then press + to display the setup functions.
Mute
Video Menu
Audio Menu
Setup Menu
2 Repeatedly press
to select the
MENU
8:27PM 13
Antenna: A
Cable/Air Cable
VCR 1 Chan: 91
VCR 2 Chan: 92
Cable Chan: Off
3 Enter the channel number you want to program by pressing
two digit buttons on the remote control. (The channel
number you enter is the channel to which the TV will tune
automatically when you later press the
the remote). The TV will change to the channel you select.
This will help you to confirm that it is indeed the channel you
want the TV to automatically tune. Most cable boxes output
their signals on either channel 02, 03, or 04.
8:27PM 03
Antenna: A
Cable/Air Cable
VCR 1 Chan: 91
VCR 2 Chan: 92
Cable Chan: Off
4 Press the + button to program the channel number you
selected into the
CABLE CHAN
8:27PM 03
Antenna: A
Cable/Air Cable
VCR 1 Chan: 91
VCR 2 Chan: 92
Cable Chan: 03
Note: Pressing the – button here will turn off this feature and
:
display again.
CABLE CHAN OFF
and
SETUP MENU
function.
CABLE CHAN
button on
DSS•CABLE
function memory.
25