ProScan Monitor/Receiver Owner's Manual page 40

M o n i t o r P a n e l
INPUT 2 AUDIO JACKS
6B
8
1
feed volume-controlled stereo
HI-FI OUT AUDIO JACKS
audio out from whatever is displayed on the TV screen.
Allows connection of audio amplifier so you can adjust
sound level with TV's remote. Connection details are
on page 46.
36
CAUTION
AUDIO
TO AVOID DAMAGE:
1. DO NOT CONNECT
SPEAKER OUTPUT
R/
TO A SEPARATE
MONO
AMPLIFIER OR
TO SPEAKERS
HI–FI OUT SELECT OUT
CONNECTED TO
ANOTHER
L
PRODUCT.
2. DO NOT CONNECT
LEFT AND RIGHT
SPEAKER OUTPUTS
R/
TOGETHER.
MONO
CABLE/ANTENNA
INPUT 1
ANT A
L
R/
MONO
ANT B
INPUT 2
L
S-VIDEO
1
CONVERTER
S-VIDEO CONNECTOR
7
1 HI-FI OUT AUDIO JACKS
EXTERNAL
SPEAKERS
+
R
–
–
L
+
SPEAKER
INT/EXT
EXT
SURR
VIDEO
INPUT SELECT
2 OUT
6A
3B
INPUT 1 VIDEO JACK
CABLE/ANTENNA CONNECTORS
2A 2B
SELECT OUT JACKS
output from whatever is displayed on the TV screen
(except signal from
audio and video signals suitable for recording. Can be
used for several applications such as:
•
VCR editing with two or three VCRs (page 44).
•
Recording TV programs onto a camcorder (page 45).
•
Recording cable-TV programs onto a VCR that is not
cable compatible (page 44).
•
Recording audio onto an audio cassette tape recorder
(page 46).
Notes: Remember that the signal coming out of these jacks is
whatever you see (and/or hear) on the TV screen. So, whatever
you want to record must be displayed on the TV screen during
recording. The small inset picture from the picture-in-picture
feature and any menus (video, audio, or setup) or displays such as
clock and channel that are on the screen can not be recorded.
To record from an S-VHS component connected to the
connector, you must also connect the video cable to the
jack and then select channel 91 on the TV screen.
INPUT 1
2A SELECT OUT AUDIO JACKS
3A INPUT 1 AUDIO JACKS
4 EXTERNAL
SPEAKER TERMINALS
5 SPEAKER SWITCH
SELECT OUT VIDEO JACK
2B
INPUT 2 VIDEO JACK
provide fixed level audio and video
connector). Provide standard
S-VIDEO
S
VIDEO
-
VIDEO