ProScan Monitor/Receiver Owner's Manual page 15

V i d e o M e n u : B a s i c F u n c t i o n s
1. Repeatedly
press MENU to
select VIDEO
Mute
MENU.
Video Menu
Audio Menu
Setup Menu
3. Repeatedly press
MENU to select a
Color
function, then press +
Tint
Contrast
or – to adjust it.
Bright
Sharp
Picture Reset
Pressing moves down the screen (one item per press).
MENU
The video menu will automatically disappear from the
screen if you do not press + or – within a few seconds.
Via remote control, your TV will "remember" which
function you displayed last, even after the menu has
disappeared from the screen. So, if you want to adjust the
same function again, simply press the + or – button on the
remote control. The last function you adjusted will
reappear on the TV screen.
Custom Picture Memory for Input Channels
The channel numbers you select to see signals from
components (like a VCR) that are connected to the
jacks on the back of the TV are called input channels.
Selecting channel 90 lets you see the signal coming from
whatever component is attached to the
channel 91 lets you see the signal from the
and channel 92 lets you see the signal from the
jacks. Your TV is equipped with a custom picture memory
for these input channels. When the TV is tuned to one of
these channels (90, 91 ,92), you can change the picture
settings for that component's signal as desired without
changing the settings of any other channel. This is very
useful because you will be able to adjust for the best
picture from each of your components and the TV will
remember those settings automatically the next time you
tune that input channel.
COLOR
increase color or press – to decrease color.
2. Then press + or – to
display the video menu.
TINT
tint or press – to add more green tint.
CONTRAST
picture. Press + to increase contrast or press – to decrease
MENU
contrast.
–........|........+
–........|........+
–........|........+
BRIGHTNESS
–........|........+
–........|........+
picture. Press + to increase brightness or press – to decrease
brightness.
SHARPNESS
sharpness or press – to decrease sharpness.
PICTURE RESET
shown above back to the factory settings. Press either + or – to
reset the video functions.
INPUT
connector,
S-VIDEO
jacks,
INPUT 1
INPUT 2
adjusts the amount of color in the picture. Press + to
adjusts the color of flesh tones. Press + to add more red
adjusts the overall brightness and contrast of the
adjusts the brightness of the dark portions of the
adjusts picture sharpness. Press + to increase
lets you quickly change all the video functions
11