ProScan Monitor/Receiver Owner's Manual page 42

H o m e A n t e n n a C o n n e c t i o n s
Follow one of the steps below to connect an indoor or outdoor antenna to your TV if you do not have a cable-TV system.
A.
If your home antenna cable is a 75-ohm, round, coaxial cable that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming Cable
from Home
Antenna
B.
If your home antenna cable is a 300-ohm, flat, twin-lead cable that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming Cable
from Home
Antenna
VHF or UHF Only
VHF/UHF Combination
C.
If your home antenna cable(s) are a 75-ohm, round, coaxial cable that carries VHF (channels 2-13) and a 300-ohm, flat, twin-
lead cable for UHF (channels 14-69), connect them to your set like this:
Incoming
UHF
Cables from
Home
and
Antenna(s)
VHF
D.
If the antenna cables coming from your home antenna(s) are two 300-ohm, flat, twin-lead cables as shown here, connect
them to your set like this:
Incoming
UHF
Cables from
Home
Antenna(s)
and
VHF
*Optional accessory available from your dealer or electronics supply store.
Mail order form is on page 33.
38
or
Push on
Adapter (supplied)
Adapter (supplied)
(such as #193983)*
Push on
Antenna Mixer
(such as #197551)*
Antenna Mixer
(such as #193984)*
Note: Be sure to connect the UHF antenna cable to the
UHF screws on the Antenna Mixer and the VHF antenna
cable to the screws marked VHF.
Back of TV
CABLE / ANTENNA
ANT A
ANT B
CONVERTER
Back of TV
CABLE / ANTENNA
ANT A
ANT B
CONVERTER
Back of TV
CABLE / ANTENNA
ANT A
ANT B
CONVERTER
Back of TV
CABLE / ANTENNA
ANT A
Push on
ANT B
CONVERTER