ProScan Monitor/Receiver Owner's Manual page 49

C a m c o r d e r C o n n e c t i o n s
S-VHS or Standard VHS Camcorder
This connection allows you to play back tapes in the
camcorder and watch them on the TV.
An S-VHS or standard camcorder can be connected directly to
your TV. If you have an S-VHS camcorder, connect the S-VHS
video cable to the connector on your TV. If you have a
S-VIDEO
standard VHS camcorder, connect the video cable to the
jack on the back of your TV. With either video
INPUT 1
connection, attach the audio cable to the
jack.
Operation: If the camcorder is connected to the
jack (instead of the connector), select TV channel 91 to
S-VIDEO
view whatever the camcorder is playing. If the camcorder is
connected to the connector and
S-VIDEO
TV channel 90 to view whatever the camcorder is playing.
Bottom of Camcorder
AV IN Jack
(Audio/Video In)
Standard VHS Camcorder
This connection allows you to record onto the camcorder
whatever is currently being displayed on the TV screen.
You'll also be able to record signals from a VCR (or
similar device) that is connected to the TV's
jacks.
INPUT 2
The TV must remain turned on during recording. If you
change channels on the TV, the channel change will be
recorded on the camcorder tape unless you pause the
camcorder during recording.
You may also want to use this connection to dub or edit
VCR tapes with two or three camcorders (or VCRs). By
connecting one camcorder (or VCR) to the
and another camcorder (or VCR) to the
be able to selectively edit and record whatever is playing
on the TV screen onto a third camcorder connected as
shown here to the
SELECT OUT
AV OUT Jack
(Audio/Video Out)
Output
Adapter
(Usually Supplied
with Camcorder)
VIDEO
audio
INPUT1 R/MONO
VIDEO INPUT 1
jack, select
INPUT 1 AUDIO
Audio/Video Input Cable
(Usually supplied with
camcorder)
or
INPUT 1
jacks
INPUT 1
jacks, you'll
INPUT 2
jacks.
AUDIO
R/
MONO
HI-FI OUT SELECT OUT
L
Audio
R/
A MONO
INPUT 1
L
CABLE/ANTENNA
ANT A
R/
MONO
Video
INPUT 2
ANT B
L
•
S-VIDEO
CONVERTER
S-VHS Cable (sometimes
a separate cable that
attaches directly to
camcorder)
Notes: When the adapter's S-VHS cable is connected to the
connector, the Video plug does not have to be connected. However, you
may prefer to plug it in anyway to keep it out of the way. The S-VHS
video will automatically override the
Channel 90.
Be sure to connect the video cable, however, if you plan to use the
camcorder for picture-in-picture viewing or if you plan to use the
jack for recording. When recording from the
OUT
TV to channel 91 to see the signal from the camcorder.
No connection necessary to S-VIDEO
Back of TV connector. To record in S-VHS, put
camcorder in S-VHS recording mode
and insert S-VHS tape.
AUDIO
R/
A
MONO
HI-FI OUT SELECT OUT
L
R/
MONO
INPUT 1
L
CABLE/ANTENNA
ANT A
R/
MONO
INPUT 2
ANT B
L
•
S-VIDEO
CONVERTER
If you connect a surveillance system to your monitor, you'll
be able to record what the camcorder is displaying on the
TV screen by connecting another camcorder (or VCR ) to
the jacks as shown here.
SELECT OUT
To see the signal from a device connected to the
jacks, select channel 91. Select channel 92 to see the signal
from a device connected to the
Note: Signals from the connector do not come thru the
S-VIDEO
jack. To record from an
OUT VIDEO
connect its regular video cable to the
channel 91.
The small inset picture from the picture-in-picture feature and any menus
(video, audio, or setup) or displays such as clock and channel that are on
the screen can not be recorded.
Back of TV
VIDEO
INPUT SELECT
1 2 OUT
-
S VIDEO
signal when you select
1
VIDEO INPUT
SELECT
jack, tune the
SELECT OUT
Audio
Video
VIDEO
INPUT SELECT
1 2 OUT
INPUT 1
jacks.
INPUT 2
SELECT
S-VHS component, remember to also
jack and then tune to
VIDEO INPUT 1
45