Audio/Video Out - ProScan Monitor/Receiver Owner's Manual

R e m o t e C o n t r o l F u n c t i o n s
VCR Channel Setup
The function lets you program to which channel
VCR 1 CHAN
the TV will automatically tune when you press the
button on the remote. This is handy if you connect a VCR
to your TV. You will no longer have to remember to which
input jacks the VCR is connected because the TV will
remember for you.
For example, if you connect a VCR's
to the TV's jacks (as shown on page 43), you will
INPUT 1
no longer have to remember to select channel 91 on the TV
to see what the VCR is playing. By entering channel 91
next to the function, the TV will automatically
VCR 1 CHAN
tune to channel 91 each time you press the
the remote.
This function is especially convenient if you have a
compatible VCR that can be operated by the
the remote. Pressing will then not only turn on the
VCR1
VCR but also automatically tune the TV to the proper
channel for viewing the picture from the VCR. You can
program most brands of remote-controllable VCRs to
respond to the button as described on page 27.
VCR1
The function works the same way. It lets you
VCR 2 CHAN
program to which channel the TV will automatically tune
when you press the button on the remote. You can
VCR2•LD
program most brands of remote-controllable VCRs to
respond to the button as described on page 27.
VCR2•LD
Pressing the button will then not only turn on the
VCR2•LD
VCR but also automatically tune the TV to the proper
channel for viewing the picture from the VCR.
Setting Up VCR Channels
with or without remote
1 Repeatedly press the
button to select
MENU
then press + to display the setup functions.
Mute
Video Menu
Audio Menu
Setup Menu
2 Repeatedly press
to select the
MENU
7:57 PM 13
Autoprogram
Chan Mem: Stored
Antenna: A
Cable/Air: Cable
VCR 1 Chan: Off
VCR1
jacks

AUDIO/VIDEO OUT

button on
VCR1
button on
VCR1
and
SETUP MENU
function.
VCR 1 CHAN
3 Enter the channel number you
want to program by pressing two
number buttons on the remote
control. (The channel number
you enter is the channel to which
the TV will tune automatically
when you later press the
VCR1
notes below if you are unsure about which channel number to
enter.
4 Press the + button to program
the channel number you
selected into the TV's memory.
Note: Pressing the – button here
will turn off this feature and
:
display again.
1
VCR CHAN OFF
5 If you have another VCR
connected to the TV, press
to select the
MENU VCR 2 CHAN
function.
6 Enter the channel number you
want to program by pressing
two number buttons on the
remote control. (This is the
channel number to which the
TV will tune automatically when you later press the
button on the remote). See the notes below if you are unsure
about which channel number to enter.
7 Press the + button to program
the channel number you selected
into the function
VCR 2 CHAN
memory.
Note: Pressing the – button here
will turn off this feature and display
:
2 again.
VCR CHAN OFF
Notes about Entering Channel Number:
• Enter channel 91 if your VCR is connected to the TV's audio and video
jacks.
1
INPUT
• Enter channel 92 if your VCR is connected to the TV's audio and video
jacks.
INPUT 2
• Enter channel 90 if you have a Super-VHS VCR that is connected to
the TV's - connector and
S VIDEO INPUT
/
).
R MONO
• Enter channel 03 (or 04) if you did not use any audio/video cables and
connected the VCR to the TV's round antenna connector labeled
/
. Enter the same channel number (03 or 04) as the
CABLE ANTENNA
/
position of the VCR's switch. This is the channel to which
3 4
CH CH
you must tune your TV for viewing signals from your VCR.
7:57PM Input 1 91
Autoprogram
Chan Mem: Stored
Antenna: A
Cable/Air: Cable
VCR 1 Chan: Off
button on the remote.) See the
7:57 PM Input 1 91
Autoprogram
Chan Mem: Stored
Antenna: A
Cable/Air: Cable
VCR 1 Chan: 91
8:04PM Input 2 92
Chan Mem: Stored
Antenna: A
Cable/Air: Cable
VCR 1 Chan: 91
VCR 2 Chan: Off
8:04PM Input 2 92
Chan Mem: Stored
Antenna: A
Cable/Air: Cable
VCR 1 Chan: 91
VCR 2 Chan: Off
VCR2
8:04PM Input 2 92
Chan Mem: Stored
Antenna: A
Cable/Air: Cable
VCR 1 Chan: 91
VCR 2 Chan: 92
audio jacks (labeled and
1
L
23