ProScan Monitor/Receiver Owner's Manual page 48

V C R C o n n e c t i o n s
Special Recording onto VCR
This connection only allows you to record on the VCR
whatever is currently being displayed on the TV screen
except for menus and special effects. This is not a
common application for recording with your VCR, but you
may find it useful in certain situations. You'll also be able
to record signals from another VCR (or similar device) that
is connected to the TV's
INPUT 1
The TV must remain turned on during recording. If you
change channels on the TV, the channel change will be
recorded on the VCR tape unless you pause the VCR
during recording.
Because your TV is cable-compatible, this application
may be used to record cable-TV programs from the TV
onto a VCR that is not cable-compatible.
You may also want to use this connection to dub or edit
VCR tapes with two or three VCRs. By connecting one
VCR (or camcorder) to the
INPUT 1
(or camcorder) to the
INPUT 2
selectively edit and record whatever is playing on the TV
screen onto a third VCR (or camcorder) connected as
shown here to the
SELECT OUT
If you connect a surveillance system to your monitor,
you'll be able to record what the camcorder is displaying
on the TV screen by connecting a VCR (or camcorder) to
the jacks as shown here. To see the signal from
SELECT OUT
a device connected to the
INPUT 1
Select channel 92 to see the signal from a device connected
to the jacks.
INPUT 2
S-VHS (Super VHS) VCR
This connection allows you to record TV
programs and play back tapes. If your cable
company requires a decoder box for premium
channels, refer to page 40.
Connect the connector on the back
S-VIDEO OUT
of the VCR to the
S-VIDEO
back of your TV using an S-VHS cable.
Remember to connect the audio cables from
the VCR to the
INPUT 1 LEFT
the back of the TV. The S-VHS cable carries
only video.
Operation: If the S-VHS VCR is connected
as shown here, select TV channel 90 to view
whatever the VCR is playing. The word
will appear on the TV when you select
S-VIDEO
channel 90. You can program your TV to
automatically select channel 90 when you press the
or button. Details are on page 23.
VCR2•LD
*Optional accessories are available from most dealers and electronics
supply stores. Mail order form is on page 33.
44
or jacks.
INPUT 2
jacks and another VCR
jacks, you'll be able to
jacks.
jacks, select channel 91.
connector on the
Incoming Cable
and jacks on
R/MONO
Back of VCR
VCR1
Back of VCR
VIDEO IN AUDIO IN
L R
V L R
Audio/Video Cables*
Audio/Video Cables*
(such as AH077G)
(such as AH077G)
To see the signal from a device connected to the
jacks, select channel 91. Select channel 92 to see the
signal from a device connected to the
Note: Signals from the
S-VIDEO
jacks. To record from an S-VHS component, remember to
SELECT OUT
also connect the regular video cable to the
tune to channel 91.
Menus (video, audio, setup), displays like clock and channel, and the
inset picture-in-picture do not come through the
S-VHS Cable* (such as #186008)
IN FROM ANT
AUDIO
VIDEO
OUT OUT
OUT TO TV
L R
S-VIDEO
V L R
OUT
Audio/Video Cables*
Audio/Video Cables*
(such as AH077G)
(such as AH077G)
Note: Remember to also connect the video cable if you plan to use this
VCR for picture-in-picture viewing or if you want to use the
jacks for recording. When recording from
TV to channel 91 to see the signal from the S-VHS VCR.
Back of TV
AUDIO
R/
MONO
HI-FI OUT SELECT OUT
L
R/
MONO
Audio
INPUT 1
L
CABLE/ANTENNA
ANT A
R/
MONO
INPUT 2
ANT B
L
VIDEO
INPUT
•
S-VIDEO
CONVERTER
1 2
INPUT 1
jacks.
INPUT 2
connector do not come through the
jack and then
VIDEO INPUT 1
jacks.
SELECT OUT
Back of TV
AUDIO
R/
MONO
HI-FI OUT SELECT OUT
L
R/
R MONO
INPUT 1
L L
CABLE/ANTENNA
INPUT 1
ANT A
R/
MONO
L
INPUT 2
ANT B
L
VIDEO
MONO
INPUT SELECT
S-VIDEO
INPUT 2
CONVERTER
1 2 OUT
L
See Note Below
Coaxial Antenna Cable*
(such as AH037 or AH065G)
SELECT OUT
jacks, tune the
SELECT OUT
SELECT
OUT