Table of Contents
Advertisement
3.4 Menu Settings
You can adjust Menu Settings here.
Press
to select. Press
to exit.
Transparency
Menu Language
Adjust
3.5 VGA Settings: This is available only in PC Mode.
Press
button to select VGA Settings and press
button. The screen will display as follows:
H-pos
V-pos
Clock
Phase
Auto
Adjust
1).H-Pos:Adjust the horizontal position of the screen.
2).V-Pos:Adjust the vertical position of the screen.
3).Clock: Fine tune the screen width.
4).Phase: Fine tune the phase of the screen.
This adjustment is not required in normal case.
5).Auto: Auto adjust to fit the screen.
4. Channel MENU
The fourth item of the MENU is Channel MENU.
You can adjust digital and analoge TV Channel.
Press
to select and press
Air/cable
Auto Scan
Favorite
Show/Hide
Channel NO.
Channel Lable .
DTV signal:
Adjust
1). Air/Cable: Select Air TV signal or cable TV signal.
2). Auto Scan: If you selected Air on Air/Cable selection,
scanning all TV channels is required prior to starting
watching the TV programs. Press the
will see the following menu.
to adjust. Press MENU
<
>
25%
<
>
English
Select
Menu
Exit
50
50
50
50
>
Select
Menu
Exit
to adjust.
<
>
Air
>
>
>
<
>
2-1
>
Good
Select
Menu
Exit
button, and you
Press"ENTER"Key To Select
Adjust
Select"yes"and
You will see the following screen that shows
progress of Auto Scan.
Adjust
3). Favorite: Press
favorite channel .
4). Show/Hide: Press
the current channel.
5). Channel NO.: Display the current channel number.
6). Channel lable: Press
channel name.
7). DTV signal: Display DTV signal intension. It can't be
selected or adjusted.
-15-
OPERATION
Are you sure?
YES
NO
Select
Menu
Exit
press the ENTER button.
R F CH:
4
Found:
4
Analog:
1
Digital:
3
Select
Menu
Exit
button to choose/delete the
button to display or hide
button to edit the current
Advertisement
Table of Contents
