ProScan Monitor/Receiver Owner's Manual page 34

P r o g r a m m i n g R e m o t e t o C o n t r o l A u d i o E q u i p m e n t
The digital remote control that came packed with your TV
is capable of controlling some audio equipment, such as a
radio, CD player, tape player, turntable or amplifier. The
remote may need to be programmed for your equipment.
This remote may not operate all models or brands listed.
To program the remote just press and hold the
button, then enter the two-digit code number for your
brand of audio equipment from the chart below.
30
AUDIO
Audio
Type of Audio Equipment and Code(s)
Equipment
AM/FM
Dimensia 03
RCA 03
1 Press and hold the
AUDIO
2 Press two number buttons to enter the code number
for your brand of audio equipment.
3 Point the remote at the audio equipment and press the
button to test the code number.
AUDIO
• If the right number was entered, the audio
equipment will turn on.
• The button will turn the device off.
POWER
Operating Notes:
After the button is programmed, the buttons described on
AUDIO
the next page will operate the basic functions of the audio
equipment. Depending on the age, brand, model, and type of
audio equipment, some models may not be able to respond to all
the function buttons listed. You will want to experiment with
each button to determine the exact function for your component.
CD TAPE PHONO
07 06 05
07 06 05
button on remote.
AUX
04
04