ProScan Monitor/Receiver Owner's Manual page 14

F r o n t P a n e l C o n t r o l s
TIME AND CHANNEL NUMBER DISPLAYS
(once set) and channel number whenever you turn on the TV,
change channels, or press the remote's
displays also appear whenever you change volume with the
buttons on the front of the TV.
VOLUME
10:23 AM
13
STEREO HEADPHONE JACK lets you connect an optional
headphone to enjoy private listening without disturbing
others. If the plug on your headphones does not fit this jack,
adapters are available from your local electronics supply
store.
Plugging in headphones will not automatically mute the sound
from the TV. This special feature enables someone with a
hearing impairment to attach a set of headphones with
separate volume control and enjoy a program with others in
the same room listening at a lower volume. You can also
enjoy private listening if desired. Here's how to completely
mute the sound except for what's coming through the
headphones.
1 Change the
SPEAKERS: ON/OFF
described on page 12.
If an optional amplifier is connected to the TV, turn off the
2
amplifier to prevent sound from coming through it.
10
show the current time
button. These
DISPLAY
+
–
MENU CH CH VOL VOL POWER
function to the setting as
OFF
REMOTE CONTROL SENSOR receives commands from the
remote control. When using the remote control, point it
toward this sensor.
POWER INDICATOR lights whenever the TV is turned on.
VOLUME BUTTONS
Press up to increase volume, or press
VOLUME
to decrease volume. The volume display will automatically
appear on the screen when you press the
POWER BUTTON
Press once to turn on TV. Press again to turn off TV.
CHANNEL BUTTONS
∧ to see the next higher channel in memory,
Press
CHANNEL
∨ to see the next lower channel in memory.
or press
CHANNEL
Your TV will automatically program channels into the
channel memory for you when you start the
feature described on page 21. You can also add or erase
individual channels as desired as described on page 22.
MENU BUTTON
Press repeatedly until the menu you want to display is
MENU
selected, then press + or –. Next press
select the function you want to adjust, and then press + or –
to adjust the setting. Details about using each function begin
on page 11.
– AND + BUTTONS
Use these buttons to enter or adjust functions after you have
pressed the button.
MENU
down
VOLUME
buttons.
VOLUME
AUTOPROGRAM
repeatedly to
MENU