Measuring/Adjusting Toe-In/Toe-Out - Arctic Cat 150 2014 Service Manual

3. Install the slotted nut on the lower steering post and
tighten to 50 ft-lb; then install a new cotter pin.
4. Place the inner tie rod ends into the steering post arm
and tighten the slotted nuts to 29 ft-lb; then install
new cotter pins.
20
5. Install the handlebar to the steering and tighten the
clamp cap screws to 15 ft-lb making sure to tighten
the front cap screws first.
KM589
KM595
6. Install the instrument pod; then install the center
panel and front rack.
Measuring/Adjusting Toe-
1. With the ATV on a level surface, center the handle-
bar for straight ahead using a suitable means of mea-
suring centering; then adjust tire pressure to
specifications (see General Information - General
Specifications).
KM591
2. Support the front of the ATV with the wheels free to
rotate; then center and secure the handlebar.
3. Measure the distance (A) and (B) between the front
wheels; then subtract distance (B) from (A). Distance
A - Distance B = Toe-In.
KM590
In/Toe-Out
KM587
KM597