Arctic Cat 150 2014 Service Manual page 27

6. From the right side, remove the spark plug cap and
starter lead; then disconnect the shift rod from the
lower shift arm.
7. Disconnect the AC generator plug; then mark the
location of the cable tie and remove the tie.
8. From the left side, remove the CVT cooling duct
clamps; then remove the cooling ducts.
9. Disconnect the signal coil, trigger coil, and gear
position switch connectors.
TR059A
10. Remove the two nuts and two cap screws securing
the exhaust pipe/muffler assembly and remove the
exhaust assembly. Account for the exhaust flange
TR071A
and two sealing wedges.
TR072A
TR063
TR061
TR070A
TR067A
TR073A
25