Arctic Cat 150 2014 Service Manual page 46

4. Install the oil pump drive gear, chain, and driven gear
as an assembly; then apply red Loctite #271 to the oil
pump shaft and secure with oil pump driven gear nut.
Tighten to 7 ft-lb.
5. Install the washer with the word INSIDE toward the gear;
then apply red Loctite #271 to the threads and install the
balancer nut (left-hand thread). Tighten to 32 ft-lb.
44
TR185
6. Install the starter drive countershaft and countershaft
gears.
TR186
7. Install the inner starter one-way drive washer with
the word INSIDE directed toward the crankshaft
drive gear; then install a key and the starter one-way
drive assembly.
TR188
TR144
TR189
TR190A
TR096
TR190B