Arctic Cat 150 2014 Service Manual page 43

4. Using a spanner wrench or appropriate socket,
remove the nut (left-hand thread) securing the starter
gear and starter one-way clutch assembly to the
crankshaft. Account for stepped washer noting that
the word INSIDE is directed toward the clutch
assembly.
5. Remove the starter gear/starter one-way clutch
assembly. Account for a key and stepped washer not-
ing that the word INSIDE is directed toward the
crankcase and the washer has a keyway.
TR090
6. Remove the starter countershaft gears; then remove
the countershaft.
7. Remove the balancer shaft drive gear nut (left-hand
thread). Account for a stepped washer with the
stepped side directed toward the drive gear.
TR191A
TR144
8. Remove the oil pump driven gear nut; then remove
the oil pump drive gear, drive chain, and driven gear.
Account for a key and spacer.
TR167A
TR096
TR094
41