Removal Of Circuit Boards And Other Electrical Components - Konica Minolta Di1610 Service Manual

3-2.

Removal of Circuit Boards and Other Electrical Components

NOTES
• When removing a circuit board or other electric component, refer to the precautions for
handling PWBs and follow the corresponding removal procedures.
• The removal procedures given in the following paragraphs omit the removal of the com-
ponent in question from a connector or a PWB support.
• Where it is absolutely necessary to touch the ICs and other electric components on the
board, be sure to ground your body.
PWB-O
4980D025AB
Symbol
PWB-P Controller/Mechanical Control Board
PWB-O Control Panel
PWB-IF Interface Board
PU1 Power Unit
HV1 High Voltage Unit
PU1
PWB-IF
4980D064AA
Name
D-9
PWB-P
HV1
Removal Procedures
☞ D-10
☞ D-10
☞ D-11
☞ D-12
☞ D-14