Print Priority; Crisscross Mode; Copy Setting; Quality Priority - Konica Minolta bizhub 164 Service Manual

9. UTILITY MODE
B. TYPE
(1) Use
• To set the media type loaded in the bypass tray.
(2) Procedure
• The default setting is PLAIN.
"PLAIN"/PLAIN-R/CARD1/CARD1-R/CARD2/CARD2-R/
9.6.4

PRINT PRIORITY

A. Use
• Specify whether to give priority to print jobs when the machine receives a print job while
printing copies.
COPY : The copy operation is given priority for 30 seconds after printing copies.
If no operation is performed for 30 seconds after printing copies or last copy
operation is finished, execute a print job.
PRINT : As print jobs are given priority, execute a print job immediately after printing
copies.
B. Procedure
• The default setting is COPY.
9.6.5

CRISSCROSS MODE

A. Use
• Specify whether or not copies are fed out in an alternating crisscross pattern when the
crisscross output conditions are met.
B. Procedure
• The default setting is OFF.
9.7

COPY SETTING

9.7.1

QUALITY PRIORITY

A. Use
• To set the priority image quality mode that is selected when the power switch is turned
ON or the Back/Stop/Reset key is pressed.
TEXT/PHOTO : Select this option when the original consists of text and photos.
TEXT : Select this option when the original consists of text only.
PHOTO : Select this option when the original consists of photos only.
B. Procedure
• The default setting is TEXT/PHOTO.
76
RECYCLE/RECYCLE-R/SPECIAL
"COPY"/PRINT
ON/"OFF"
The edge of the text is reproduced sharply, while photos are repro-
duced as a smooth image.
The edge of the text is reproduced sharply.
Photos are reproduced as a smooth image.
"TEXT/PHOTO"/TEXT/PHOTO
Field Service Ver. 2.0 Jun. 2010