Paper Source Setting; Copy Setting - Konica Minolta Di1610 Service Manual

(2)

Paper Source Setting

• Various settings for the paper tray can be specified.
No. Function
TRAY1
1
PAPER
TRAY
2
SETTING
(3)

Copy Setting

• The default settings for each copy function can be specified.
No. Function
PAPER
1
PRIORITY
DENSITY PRI-
2
ORITY
DENSITY
3
LEVEL (A)
DENSITY
4
LEVEL (M)
OUTPUT PRI-
5
ORITY
6 RESOLUTION
Purpose
To specify the type and size of
paper loaded into Tray1.
To specify whether or not auto tray
switching is enabled for each
paper tray.
Purpose
To specify the paper tray that is
given priority.
To specify the image density set-
ting that is selected when the
machine is turned on or the Panel
Reset key is pressed.
To specify the default density level
when the Auto setting is selected.
To specify the default density level
when manually setting the image
density.
To specify the default finishing set-
ting.
To specify the scanning resolution. The default setting is "600 × 300".
S-8
Setting Details/Precautions
• The default settings are
"PLAIN" in addition to "A4 L"
or "LT".
<Procedure>
1. Select the paper type.
PLAIN OHP CARD ENVELOPE
2. Select the paper size.
A5 B5 A4 FLS 16K HL LT LG
NOTE
If "OHP" is selected as the
paper type, only "A4" and "LT"
are available as paper sizes.
3. To specify a custom paper
size, type in the size.
• The default setting is "CON-
TINUOUS".
FIXED CONTINUOUS
Setting Details/Precautions
• The default setting is "TRAY1".
TRAY1 TRAY2
• The default setting is "AUTO".
AUTO MANUAL
• The default setting is "NOR-
MAL (0)".
The setting range is -1 to +1.
• The default setting is "NOR-
MAL (0)".
The setting range is -4 to +4.
• The default setting is "NON".
NON SORT
600×300 600×600
PHOTO