Table 2.1: Z-Surveyor Front Panel Description - ashtech Z-Surveyor Operation And Reference Manual

Table 2.1 describes the front panel components of the Z-Surveyor.
Number
12

Table 2.1: Z-Surveyor Front Panel Description

Component
1 On/Off Power Button
2 LED
• Power Indicator
• SS Radio Indicator
3 LED Display
4 Up/Down buttons
5 PCMCIA LED (located
inside PCMCIA slot
door)
6 PCMCIA slot door
7 Battery door
Function
Turns unit on and off.
• Solid green light indicates On/Off button is
depressed. Flashing green light indicates power
applied to receiver. Flashing red light indicated
receiver is in sleep mode.
• Flashing green light indicates spread spectrum radio
activity.
Display and input screen for receiver. Displays
messages, parameters, equipment status, and warning
messages. The screen will display only eight
characters at one time while scrolling messages larger
than eight characters from right to left.
Operate these button for use with the LED display.
Visible only when PCMCIA bay door is open. If this
LED flashes, a recording session is in process. If this
LED is not flashing, the data recording session has
stopped and the PCMCIA card may be removed.
Door which allows access to the PCMCIA slot.
Door which allows access to the battery slot.
Z-Surveyor & Z-FX Operation Manual