Survey Configuration (Survconf) - ashtech Z-Surveyor Operation And Reference Manual

•
•

Survey Configuration (SURVCONF)

This menu allows the user to set or change the display item available to the user while
conducting specific surveys, dependent on the type of survey being conducted (e.g.
the epoch counter in kinematic mode). There are three modes:
•
•
•
The display will only show the items that are significant for the mode selected.
50
Base Position (BASE POS) (submenu)
The base position is associated with the following information:
• Latitude (LAT:N/S**º**'**.*****")
• Longitude (LON:E/W***º**'**.*****")
• Altitude (ALT:*****.**m)
• Set to current position (HERE)
Sets the base position to the position currently computed by the receiver
(the stand-alone position).
Survey Status (STATUS)
Status is a submenu with information which can be found in Table 4.3.
STATIC
KINEMATIC
RTK BASE
Z-Surveyor & Z-FX Operation Manual