Screen 5 - Differential Information/Residuals Error/Msk Status; Differential Information - ashtech ZY-12 Information Supplement

Screen 5 - Differential Information/Residu-
als Error/MSK Status
Three different displays are available in this screen:
• Page 1 displays differential information
• Page 2 displays range residuals and position error information
• Page 3 displays MSK status. To toggle between the pages, press the up or
down arrows.
RTCM Information
The RTCM information displayed on Screen 5 depends on whether the unit is set
as a base or remote station. In base mode, it displays information about
transmitted messages; in remote mode, data from received messages (Figure
3.23). Table 3.18 describes the screen parameters.
Parameter
RTCM Displays the receiver's current RTCM mode (OFF, BASE, or REMOTE).
TYPE Indicates the type of message that is being generated (BASE) or that is being
received (ROVER).
STID The reference station identification, set on the RTCM Options screen (base
mode) or received from the base station.
Screen Descriptions
Figure 3.23. Message Data - Screen 5
Table 3.18. Message Parameters
Description
47