System Information (Sysinfo); Receiver Status (Survey:mode) - ashtech Z-Surveyor Operation And Reference Manual

The following sections describe each available menu. The text within the parentheses
matches the text on the display.

System Information (SysInfo)

This menu allows the user to obtain basic receiver information such as serial number,
options currently loaded, power and memory status, etc.
• Receiver Software version number (VER:****)
Version of firmware installed within the receiver. You should record this
information should you need to contact Customer Support.
• Receiver Serial Number (S/N:************)
This is the serial number of the receiver.You should record this information
should you need to contact Customer Support.
• Options table (Options:**********)
This string of letters/numbers represents the receiver options loaded in the
receiver (refer to Table 1.4). Record this information should you need to
contact Customer Support.
• Power Status (BAT:**min)
Indicates the amount of power left in the internal battery, expressed in
remaining time (minutes) based on the current power consumption.
• Memory Status (MEM:***%)
Indicates the percentage of memory left on the PCMCIA card.

Receiver Status (Survey:mode)

This menu allows the user to obtain basic receiver status such as current position,
number of satellites locked, PDOP, current time, etc. dependent on the type of survey
being conducted. There are three modes:
• STATIC
• KINEMATIC
• RTK BASE
The display will only show the items that are significant for the mode selected. The
mode is selected through the
Operations
main menu.
SURVCONF
47