Rear Panel
The rear panel of the Z-Surveyor contains all the connectors necessary to provide
connection to all external equipment. Figure 2.2 represents the rear panel.
Table 2.2 describes all the rear panel components of the Z-Surveyor.
Number
1
2
Equipment Description
1
2
Figure 2.2: Z-Surveyor Rear Panel
Table 2.2: Z-Surveyor Rear Panel Description
Component
Power Connector
Allows external power source (refer to Table 2.3).
SS Radio Connector
Allows RF connection of the embedded Spread Spectrum
Radio Receiver Board to the Spread Spectrum Antenna
TNC reverse polarity.
3
4
Function
5
13