Table of Contents
Advertisement
Operations
LED Display Interface
General
The LED interface allows you to monitor, query, and control several receiver surveying
functions. All functions are organized in a menu tree which is accessed by using the up/
down arrow buttons. Table 4.1 describes the basic functions of the up and down buttons
on the front panel.
Mode
Display ↓ arrow pressed >2 seconds
Edit
If the display is inactive for more than 20 seconds, the receiver will enter sleep mode. The
unit performs this function to save power. Press either key to restore the display to its
original state prior to sleep mode.
Operations
Table 4.1: Control Buttons
Button Combination
↑ arrow pressed <2 seconds
↑ arrow pressed >2 seconds
↓ arrow pressed <2 seconds
↑+↓ arrow pressed
simultaneously <2 seconds
↑+↓ arrow pressed
simultaneously >2 seconds
↑ arrow pressed <2 seconds
↑ arrow pressed >2 seconds
↓ arrow pressed <2 seconds
↓ arrow pressed >2 seconds
↑+↓ arrow pressed
simultaneously <2 seconds
↑+↓ arrow pressed
simultaneously >2 seconds
Function
Scrolls through the submenu options
Returns display to upper level menu
Places display in edit mode
Sends display to lower level menu
No action
Cancels and exits.
Scrolls display upward through available values
Scrolls display upward quickly
Scrolls display downward through available values
Scrolls display downward quickly
Accepts parameter setting
Cancels parameter setting
4
45
Hide quick links:
Advertisement
Table of Contents
