Figure 3.2: Pcmcia Card Insertion - ashtech Z-Surveyor Operation And Reference Manual

4.
5.
6.
30
Grasp the PCMCIA card by the sides with thumb and forefinger while
holding memory bay door open.

Figure 3.2: PCMCIA card insertion

Slide the PCMCIA card all the way into the uppermost memory slot of the
Z-Surveyor (the slot closest to the top of the unit when viewed right-side-up
from the front). Observe that the other slot is blocked with a slot filler to
prevent insertion.
All PCMCIA cards are keyed so they only seat into the card connector one
way. While this feature assists in the insertion of the card, you may be able to
force the card into the connector improperly. Improper installation of the
PCMCIA card may cause damage to the Z-Surveyor.
Ensure you seated the PCMCIA card properly.
CAUTION
Z-Surveyor & Z-FX Operation Manual