Data Recording (Sessions) - ashtech Z-Surveyor Operation And Reference Manual

Data Recording (Sessions)

This menu allows the user to control data recording sessions.
• Stop Session
Closes the session and stops recording (this function is performed
automatically when the receiver is powered off). This command must be
entered prior to extracting the PCMCIA card if the receiver is recording data.
Failure to do so may cause loss of data and card corruption.
• Start Session
Opens session and begins recording (the action is performed automatically
when inserting a new PCMCIA card or applying power to the receiver). This
command must be entered if a session was stopped and the PCMCIA card
was not removed.
• List Sessions
Lists all of the data recording sessions on the PCMCIA card in the order of
recording up to 100. If the data recording sessions exceed 100, the receiver
lists the first 99 as well as the most recent session. If in the "edit" mode (i.e.,
the
of the session. Pressing "enter" (i.e., pressing both buttons together <2
seconds) will confirm the deletion while pressing "cancel" (i.e., pressing
both buttons together >2 seconds) will cancel the deletion.
• New Session
Closes current data file and opens a new one in the same directory (data
recording does not stop during this operation).
• Delete all
Deletes all data on the PC card by formatting it (highly recommended with a
new PCMCIA card or when all data has been downloaded from a data card).
Operations
↓
button was pressed for <2 seconds), the receiver will select the deletion
53