Wireless Internet Access - ZyXEL Communications VMG892-B10A User Manual

Dual band wireless ac/n vdsl2 voip combo wan gigabit iad
Table of Contents

Advertisement

Check the hardware connections, and make sure the LEDs are behaving as expected. See the
2
Quick Start Guide and
Turn the Device off and on.
3
If the problem continues, contact your ISP.
4

41.4 Wireless Internet Access

What factors may cause intermittent or unstabled wireless connection? How can I solve this
problem?
The following factors may cause interference:
• Obstacles: walls, ceilings, furniture, and so on.
• Building Materials: metal doors, aluminum studs.
• Electrical devices: microwaves, monitors, electric motors, cordless phones, and other wireless
devices.
To optimize the speed and quality of your wireless connection, you can:
• Move your wireless device closer to the AP if the signal strength is low.
• Reduce wireless interference that may be caused by other wireless networks or surrounding
wireless electronics such as cordless phones.
• Place the AP where there are minimum obstacles (such as walls and ceilings) between the AP and
the wireless client.
• Reduce the number of wireless clients connecting to the same AP simultaneously, or add
additional APs if necessary.
• Try closing some programs that use the Internet, especially peer-to-peer applications. If the
wireless client is sending or receiving a lot of information, it may have too many programs open
that use the Internet.
What is a Server Set ID (SSID)?
An SSID is a name that uniquely identifies a wireless network. The AP and all the clients within a
wireless network must use the same SSID.
VMG8924-B10A and VMG8924-B30A Series User's Guide
Section 1.5 on page
21.
Chapter 41 Troubleshooting
327

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vmg8924-b30a seriesVmg8924-b10a series

Table of Contents