ZyXEL Communications VMG892-B10A User Manual page 62

Chapter 5 Broadband
Table 10 Network Setting > Broadband > 3G Backup (continued)
LABEL
Send
Notification to
Email
Advanced
Budget Setup
Enable Budget
Control
Time Budget
Data Budget
(Mbytes)
Data Budget
(kPackets)
Reset all
budget
counters on
Reset time and
data budget
counters
Actions before
over budget
Enable % of
time budget/
data budget
(Mbytes)/data
budget
(kPackets)
Actions when
over budget
Current 3G
connection
Actions
Enable Email
Notification
62
DESCRIPTION
Notifications are sent to the e-mail address specified in this field. If this field is left blank,
notifications cannot be sent via e-mail.
Click this to show the advanced 3G backup settings.
Select Enable to set a monthly limit for the user account of the installed 3G card. You can
set a limit on the total traffic and/or call time. The Device takes the actions you specified
when a limit is exceeded during the month.
Select this and specify the amount of time (in hours) that the 3G connection can be used
within one month. If you change the value after you configure and enable budget control,
the Device resets the statistics.
Select this and specify how much downstream and/or upstream data (in Mega bytes) can be
transmitted via the 3G connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the Device).
Select Upload to set a limit on the upstream traffic (from the Device to the ISP).
If you change the value after you configure and enable budget control, the Device resets the
statistics.
Select this and specify how much downstream and/or upstream data (in k Packets) can be
transmitted via the 3G connection within one month.
Select Download/Upload to set a limit on the total traffic in both directions.
Select Download to set a limit on the downstream traffic (from the ISP to the Device).
Select Upload to set a limit on the upstream traffic (from the Device to the ISP).
If you change the value after you configure and enable budget control, the Device resets the
statistics.
Select the date on which the Device resets the budget every month. Select last if you want
the Device to reset the budget on the last day of the month. Select specific and enter the
number of the date you want the Device to reset the budget
Click this button to reset the time and data budgets immediately. The count starts over with
the 3G connection's full configured monthly time and data budgets. This does not affect the
normal monthly budget restart; so if you configured the time and data budget counters to
reset on the second day of the month and you use this button on the first, the time and data
budget counters will still reset on the second.
Specify the actions the Device takes before the time or data limit exceeds.
Select Enable and enter a number from 1 to 99 in the percentage fields. If you change the
value after you configure and enable budget control, the Device resets the statistics.
Specify the actions the Device takes when the time or data limit is exceeded.
Select Keep to maintain an existing 3G connection or Drop to disconnect it.
Select this to enable the e-mail notification function. The Device will e-mail you a
notification when there over budget occurs.
VMG8924-B10A and VMG8924-B30A Series User's Guide