ZyXEL Communications VMG892-B10A User Manual page 75

Click Network Setting > Wireless to open the General screen.
Figure 33 Network Setting > Wireless > General
The following table describes the general wireless LAN labels in this screen.
Table 15 Network Setting > Wireless > General
LABEL
Wireless Network Setup
Wireless
Band
VMG8924-B10A and VMG8924-B30A Series User's Guide
DESCRIPTION
You can Enable or Disable the wireless LAN in this field.
This shows the wireless band which this radio profile is using.
2.4 GHz is the frequency used by IEEE 802.11b/g/n wireless clients.
5 GHz networks use higher frequencies with less interferences than 2.4 GHz networks and
can offer higher speeds. However, 5 GHz signals do not penetrate solid objects like walls as
well as 2.4 GHz signals can do. It is easy to get signal attenuation if there are many walls
between the Device and a client. 5 GHz is used by IEEE 802.11a/n/ac wireless clients.
Chapter 6 Wireless
75