The Sip Account Add/Edit Screen - ZyXEL Communications VMG892-B10A User Manual

call, you need to enable and configure a SIP account, and map it to a phone port. The SIP account
contains information that allows your Device to connect to your VoIP service provider.
See Section 21.3.1 on page 237
Use this screen to view SIP account information. You can also enable and disable each SIP account.
To access this screen, click VoIP > SIP > SIP Account.
Figure 142 VoIP > SIP > SIP Account
Each field is described in the following table.
Table 110 VoIP > SIP > SIP Account
LABEL
Add new account
#
Active
SIP Account
Service Provider
Account No.
Modify

21.3.1 The SIP Account Add/Edit Screen

Use this screen to configure a SIP account and map it to a phone port. To access this screen, click
the Add new account button or click the Edit icon of an entry in the VoIP > SIP > SIP Account
screen.
VMG8924-B10A and VMG8924-B30A Series User's Guide
for how to map a SIP account to a phone port.
DESCRIPTION
Click this to configure a SIP account.
This is the index number of the entry.
This shows whether the SIP account is activated or not.
A yellow bulb signifies that this SIP account is activated. A gray bulb signifies that this SIP
account is not activated.
This shows the name of the SIP account.
This shows the name of the SIP service provider.
This shows the SIP number.
Click the Edit icon to configure the SIP account.
Click the Delete icon to delete this SIP account from the Device.
Chapter 21 Voice
237