ZyXEL Communications VMG892-B10A User Manual page 280

Chapter 26 Routing Table
Table 133 System Monitor > Routing Table (continued)
LABEL
Flag
Metric
Service
Interface
280
DESCRIPTION
This indicates the route status.
U-Up: The route is up.
!-Reject: The route is blocked and will force a route lookup to fail.
G-Gateway: The route uses a gateway to forward traffic.
H-Host: The target of the route is a host.
R-Reinstate: The route is reinstated for dynamic routing.
D-Dynamic (redirect): The route is dynamically installed by a routing daemon or redirect.
M-Modified (redirect): The route is modified from a routing daemon or redirect.
The metric represents the "cost of transmission". A router determines the best route for
transmission by choosing a path with the lowest "cost". The smaller the number, the lower
the "cost".
This indicates the name of the service used to forward the route.
This indicates the name of the interface through which the route is forwarded.
brx indicates a LAN interface where x can be 0~3 to represent LAN1 to LAN4 respectively.
ptm0 indicates a WAN interface using IPoE or in bridge mode.
ppp0 indicates a WAN interface using PPPoE.
VMG8924-B10A and VMG8924-B30A Series User's Guide