Phone Functions Summary - ZyXEL Communications VMG892-B10A User Manual

Chapter 21 Voice
USA Call Transfer
Do the following to transfer an incoming call (that you have answered) to another phone.
Press the flash key to put the caller on hold.
1
When you hear the dial tone, dial "*98#" followed by the number to which you want to transfer the
2
call.
After you hear the ring signal or the second party answers it, hang up the phone.
3
USA Three-Way Conference
Use the following steps to make three-way conference calls.
When you are on the phone talking to someone (party A), press the flash key to put the caller on
1
hold and get a dial tone.
Dial a phone number directly to make another call (to party B).
2
When party B answers the second call, press the flash key to create a three-way conversation.
3
Hang up the phone to drop the connection.
4
If you want to separate the activated three-way conference into two individual connections (with
5
party A on-line and party B on hold), press the flash key.
If you want to go back to the three-way conversation, press the flash key again.
6
If you want to separate the activated three-way conference into two individual connections again,
7
press the flash key. This time the party B is on-line and party A is on hold.

21.10.2.4 Phone Functions Summary

The following table shows the key combinations you can enter on your phone's keypad to use
certain features.
Table 124 Phone Functions Summary
ACTION FUNCTION
*98# Call transfer
*66# Call return
*95# Enable Do Not Disturb
#95# Disable Do Not Disturb
*41# Enable Call Waiting
#41# Disable Call Waiting
**** IVR
#### Internal Call
264
DESCRIPTION
Transfer a call to another phone. See
(Europe type) and Section 21.10.2.3 on page 263
Place a call to the last person who called you.
Use these to set your phone not to ring when someone calls you, or
to turn this function off.
Use these to allow you to put a call on hold when you are answering
another, or to turn this function off.
Use these to set up Interactive Voice Response (IVR). IVR allows
you to record custom caller ringing tones (the sound a caller hears
before you pick up the phone) and on hold tones (the sound
someone hears when you put their call on hold).
Call the phone(s) connected to the Device.
VMG8924-B10A and VMG8924-B30A Series User's Guide
Section 21.10.2.2 on page 261
(USA type).