The File Sharing Screen - ZyXEL Communications VMG892-B10A User Manual

Chapter 13 USB Service

13.2 The File Sharing Screen

Use this screen to set up file sharing through the Device. The Device's LAN users can access the
shared folder (or share) from the USB device inserted in the Device. To access this screen, click
Network Setting > USB Service > File Sharing.
Figure 106 Network Setting > USB Service > File Sharing
Each field is described in the following table.
Table 76 Network Setting > Home Networking > File Sharing
LABEL
Information
Volume
Capacity
Used Space
Server Configuration
File Sharing
Services
Host Name
Share Directory List
Add New Share
Active
Status
188
DESCRIPTION
This is the volume name the Device gives to an inserted USB device.
This is the total available memory size (in megabytes) on the USB device.
This is the memory size (in megabytes) already used on the USB device.
Select Enable to activate file sharing through the Device.
Enter the host name on the share.
Click this to create a new share for users to access through the Device.
Select this to activate the share.
This field shows the status of the share.
: The share is not activated.
: The share is activated and shared to all users.
: The share is activated and only shared to the specified users listed in the Account
Management section below.
VMG8924-B10A and VMG8924-B30A Series User's Guide