ZyXEL Communications VMG892-B10A User Manual page 32

Chapter 2 The Web Configurator
Table 3 Navigation Panel Summary (continued)
LINK
Routing
QoS
NAT
DNS
Interface
Group
USB Service
Power
Management
Security Settings
Firewall
MAC Filter
32
TAB FUNCTION
Static Route Use this screen to view and set up static routes on the Device.
DNS Route
Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).
Policy Use this screen to configure policy routing on the Device.
Forwarding
RIP Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.
General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
Port Forwarding Use this screen to make your local servers visible to the outside
world.
Applications Use this screen to configure servers behind the Device.
Port Triggering Use this screen to change your Device's port triggering settings.
DMZ Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your Device's address mapping settings.
Sessions Use this screen to configure the maximum number of NAT sessions
each client host is allowed to have through the Device.
DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
Use this screen to map a port to a PVC or bridge group.
File Sharing Use this screen to enable file sharing via the Device.
Media Server Use this screen to use the Device as a media server.
Printer Server Use this screen to enable the print server on the Device and get the
model name of the associated printer.
Power This screen is only available for supervisors. Use this screen to
Management manually turn on/off specific interface(s) and/or all LEDs
immediately.
Auto Switch Off This screen is only available for supervisors. Use this screen to
configure schedules to have the Device automatically turn on/off
specific interface(s) and/or all LEDs.
General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add Internet services and configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network
services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
Use this screen to block or allow traffic from devices of certain MAC
addresses to the Device.
VMG8924-B10A and VMG8924-B30A Series User's Guide