Add/Edit A Service - ZyXEL Communications VMG892-B10A User Manual

Chapter 15 Firewall
Click Security > Firewall > Protocol to display the following screen.
Figure 117 Security > Firewall > Protocol
The following table describes the labels in this screen.
Table 86 Security > Firewall > Protocol
LABEL
Add new
service entry
Name
Description
Ports/Protocol
Number
Modify

15.3.1 Add/Edit a Service

Use this screen to add a customized service rule that you can use in the firewall's ACL rule
configuration. Click Add new service entry or the edit icon next to an existing service rule in the
Service screen to display the following screen.
Figure 118 Service: Add/Edit
200
DESCRIPTION
Click this to add a new service.
This is the name of your customized service.
This is the description of your customized service.
This shows the IP protocol (TCP, UDP, ICMP, or TCP/UDP) and the port number or range
of ports that defines your customized service. Other and the protocol number displays if the
service uses another IP protocol.
Click the Edit icon to edit the entry.
Click the Delete icon to remove this entry.
VMG8924-B10A and VMG8924-B30A Series User's Guide