Test Menu; Manually Homing The Fixture; Moving The Fixture To Setup Position - High End Systems studio color User Manual

Test Menu

Use the following subsections to perform the functions contained within the
menu.
T E S T

Manually Homing the Fixture

To manually home the fixture, complete the following procedure:
1. Hold the <
MENU
2. Using the up and down buttons, scroll down to the
the < > button. The screen will display
ENTER
3. Press the <
ENTER
(reset) and
R S T
automatically reset the display when the process is complete.

Moving the Fixture to Setup Position

Caution: The setup position is used only by service personnel before maintenance
routines.
To place the fixture in setup position before service, complete the following
procedure:
1. Hold the <
MENU
2. Using the up and down buttons, scroll down to the
the < > button.
ENTER
3. Using the up and down buttons, scroll down to the
the < > button. The display will indicate
ENTER
motors are electronically locked into place.
4. Perform the appropriate maintenance procedures.
5. Press the <
MENU
> button until the display changes to
> button to home the fixture. The display will indicate
during the process. The fixture will
H O M E
> button until the display changes to
> button to reset and home the fixture.
.
A d d R
field and press
T E S T
.
H O M E
.
A d d R
field and press
T E S T
field and press
S / U P
while the
S E T N O W
Chapter 3 Menu System 3-11