Startup Help; Continuous Scan Mode - Honeywell HX2 User Manual

Startup Help

Contact your representative
Can't change the date/time or
adjust the volume.
Touchscreen is not accepting
stylus taps or needs recal-
ibration.
HX2 seems to lockup as soon
as it is rebooted.
New HX2 main batteries don't
last more than a few hours.

Continuous Scan Mode

If Continuous Scan Mode has been enabled (factory default setting is 'Disabled'), the laser (or imager) is always on and
decoding.
Caution: Laser beam is emitted continuously. Do not stare into the laser beam.
2-24
if you need more help.
AppLock is installed and may be running in User Mode on the HX2. AppLock user mode
restricts access to the control panels.
See Also: "Calibrating the
orPress Ctrl+Esc to force the Start Menu to appear. Use the tab, backtab and arrow keys
to move the cursor from element to element.
There may be slight delays while the wireless client connects to the network, authorization
for voice-enabled applications complete, Wavelink Avalanche management of the HX2
startup completes,and Bluetooth relationships establish or re-establish.
When the desktop appears or an application begins, the HX2 is ready for use.
New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries) grad-
ually lose their capacity over time (in a linear fashion) and never just stop working. This is
important to remember – the HX2 is always 'on' even when in the Suspend state and draws
battery power at all times.
Touchscreen" when the touchscreen needs recalibration,