Note: CT60L0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with Dolphin mobile computers for maximum performance and durability. Contact a Honeywell sales representative for...
14.6 watt-hour battery manufactured for Honeywell International Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Ensure all components are dry prior to placing the battery in the computer. Mating wet components...
4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
Turn Power On/Off To turn the computer on: • Press and release the Power button. To turn the computer off: Press and hold the Power button until the options menu appears. Touch Power Off. When prompted to shut down the computer, touch OK. Note: Note: You should always power off the computer before removing the battery.
About the Home Screen Notification / Status Bar Search Bar Touch initiate a voice search or command. Home Screen Panel Touch access all apps. Favorites Tray To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons Button Description Back Return to the previous screen. Recent Apps View and switch between recently used apps. Home Return to the Home screen. Search Start a search on the computer or the Internet. Volume Raise or lower the volume of the speaker.
Scan a Bar Code with the Scan Demo Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle. Touch > Demos > Scan Demo. Point the computer at the bar code. Touch Scan on the touch screen or press and hold a Scan button.
Sync Data To move files between your CT60 and a computer: Connect the CT60 to your computer using a USB charge/ communication accessory. By default, the CT60 is in USB charging only mode. To enable file transfers, swipe down from the top of the Home screen to access the Notifications panel.
Restart the Mobile Computer You may need to restart the mobile computer to correct condi- tions where an application stops responding to the system or the computer seems to be locked up. Press and hold the Power button until the options menu appears.
Microsoft Corporation in the United States and/or other countries. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.