Hotline - Yealink SIP T46G Administrator's Manual

3. Press the Save soft key to accept the change.
Note
The send tone feature works only if the key tone feature is enabled. The key tone feature
is enabled by default.
A hotline is a point-to-point communication link in which a call is automatically directed
to the preset hotline number. The IP phone automatically dials out the hotline number
using the first available line after a time interval when off-hook. The IP phones only
support one hotline number.
Procedure
Hotline can be configured using the configuration files or locally.
Configuration File
Local
To configure hotline via web user interface:
1. Click on Features->General Information.
2. Enter the hotline number in the Hotline Number field.
<y000000000028>.cfg
Web User Interface
Phone User Interface
Configuring Basic Features
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
For more information, refer to

Hotline

on page 252.
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits to automatically
dial out the hotline number.
53