Yealink SIP T46G Administrator's Manual page 170

TLV Type
Network Policy
Extended
Power-via-MDI
Inventory –
Hardware Revision
Inventory –
Firmware Revision
Inventory –
Software Revision
Inventory – Serial
Number
Inventory –
Manufacturer Name
Inventory – Model
Name
Asset ID
Procedure
LLDP can be configured using the configuration files or locally.
Configuration File
Local
To configure LLDP via web user interface:
1. Click on Network->Advanced.
2. In the LLDP block, select the desired value from the pull-down list of Active.
3. Enter the desired time interval in the Packet_Interval (1~3600s) field.
TLV Name
The supported LLDP-MED TLV types are:
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD, Inventory.
Port VLAN ID, application type, L2 priority
and DSCP value.
Power type, source, priority and value.
Hardware revision of phone.
Firmware revision of phone.
Software revision of phone.
Serial number of phone.
Manufacturer name of phone.
The default value is ―yealink‖.
Model name of phone.
Assertion identifier of phone.
The default value is ―asset‖.
<y000000000028>.cfg
Web User Interface
Configuring Advanced Features
Description
Configure the LLDP feature.
For more information, refer to
LLDP on page 311.
Configure the LLDP feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
157