Ring Workaround - Yealink SIP T46G Administrator's Manual

Administrator's Guide for SIP-T46G IP Phone
Local
To configure 180 ring workaround via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of 180 Ring Workaround.
3. Click Confirm to accept the change.
An outbound proxy server can receive all initiating request messages and route them to
the designated destination. If the IP phone is configured to use an outbound proxy
server within a dialog, all SIP request messages from the IP phone will be forced to send
to the outbound proxy server.
Note
To use this feature, make sure the outbound server is configured on the IP phone in
advance.
76
Web User Interface
workaround feature.
For more information, refer to

Ring Workaround

on page 265.
Configure the 180 ring
workaround feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
180