Yealink SIP T46G Administrator's Manual page 47

Administrator's Guide for SIP-T46G IP Phone
2. Select the desired wallpaper from the pull-down list of Wallpaper.
3. Click Confirm to accept the change.
To change the wallpaper via phone user interface:
1. Press Menu->Basic->Display->Wallpaper.
2. Press
3. Press the Save soft key to accept the change.
Backlight provides the brightness necessary for making the phone LCD screen readable
in a darkened environment. Backlight On Intensity is used to adjust the backlight
intensity of the LCD screen. Backlight time specifies the delay time to turn off or dusky
the backlight when the IP phone is inactive. Backlight Idle Intensity decides whether the
IP phone turns off or dusky the backlight of the LCD screen after a period of inactivity.
You can configure the backlight time as one of the following types:
Always On: Backlight is turned on permanently.

1min, 2min, 5min, 10min, 30min: Backlight is turned off or dusky when the IP phone is

inactive after a preset period of time (in seconds). It is automatically turned on if the
status of the IP phone changes or any key is pressed.
Procedure
Backlight can be configured using the configuration files or locally.
Configuration File
34
or , or the Switch soft key to select the desired wallpaper.
<y000000000028>.cfg
Configure the backlight of the
LCD screen.
For more information, refer to