Yealink SIP T46G Administrator's Manual page 41

Administrator's Guide for SIP-T46G IP Phone
code rule, the IP phones will automatically add the area code to the beginning of the
numbers and dial out. The IP phones only support one area code rule.
Procedure
Area code rule can be configured using the configuration files or locally.
Configuration File
Local
To configure an area code rule via web user interface:
1. Click on Settings->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave the field blank or enter an invalid value, the area code rule applies to
all accounts on the IP phone.
4. Click Confirm to accept the change.
28
<y000000000028>.cfg
Web User Interface
Create the area code rule and
specify the maximum and
minimum lengths of the entered
numbers.
For more information, refer to
Plan on page 237.
Create the area code rule and
specify the maximum and
minimum lengths of the entered
numbers.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-areacode&q=load
Dial