Yealink SIP T46G Administrator's Manual page 235

Administrator's Guide for SIP-T46G IP Phone
2. In the Export or Import Configuration block, click Export to open the file download
window, and then save the file to your local system.
This section describes solutions to some common scenarios that may occur while using
the IP phone. If you encounter a scenario which is not listed in this section, contact your
Yealink reseller for further support.
Do one of the following:
Check that the power LED is on to ensure the IP phone is powered on.

Ensure the IP phone is properly plugged into a functional AC outlet.

Ensure that the IP phone isn't plugged into a plug controlled by a switch that is off.

If the IP phone is plugged into a power strip, try plugging it directly into a wall

outlet instead.
If your phone is powered from PoE, ensure you use a PoE compliant switch or hub.

Do one of the following:
Ensure that the Ethernet cable is plugged into the Internet port on the IP phone and

the Ethernet cable is not loose.
Ensure the Ethernet cable is not damaged.

Ensure the IP address and other network parameters are set correctly.

222