Yealink SIP T46G Administrator's Manual page 282

Format
Default Value
Range
Example
Parameter-
sip.rfc2543_hold
Description
Format
Default Value
Range
Example
Call Forward Mode
Parameter-
features.fwd_mode
Description
tone every 30 seconds when there is a hold
call on the IP phone.
Note: It works only if the parameter
―features.play_hold_tone.enable‖ is set to 1
(Enabled).
Integer
30
Not Applicable
features.play_hold_tone.delay = 60
Configuration File
<y000000000028>.cfg
Specifies whether RFC 2543 (c=0.0.0.0)
outgoing hold signaling is used.
If set to 0 (Disabled), use SDP media direction
attributes (such as a=sendonly) per RFC 3264
when putting a call on hold.
If set to 0 (Enabled), use SDP media
connection address c=0.0.0.0 per RFC 2543
when putting a call on hold.
Boolean
0
0-Disabled
1-Enabled
sip.rfc2543_hold = 1
Configuration File
<y000000000028>.cfg
Sets the call forward mode for the IP phone.
If set to 0 (Phone), the call forward feature is
effective for the IP phone.
If set to 1 (Custom), you can configure the call
forward feature for each account.
Appendix
269