Yealink SIP T46G Administrator's Manual page 269

Administrator's Guide for SIP-T46G IP Phone
Format
Default Value
Range
Example
Parameter-
auto_redial.enable
Description
Format
Default Value
Range
Example
Parameter-
auto_redial.interval
Description
Format
Default Value
Range
256
audible indicator when receiving a new
incoming call during a call.
Note: It works only if the parameter
―call_waiting.enable‖ is set to 1 (Enabled).
Boolean
1
0-Disabled
1-Enabled
call_waiting.tone = 1
Configuration File
<y000000000028>.cfg
Enables or disables the IP phone to
automatically redial the called number when it
is busy.
If set to 1 (Enabled), the IP phone dials the
previous dialed out number automatically
when the dialed number is busy.
Boolean
0
0-Disabled
1-Enabled
auto_redial.enable = 1
Configuration File
<y000000000028>.cfg
Sets the interval (in seconds) for the IP phone
to wait between redials.
The IP phone redials the dialed number at
regular intervals till the callee answers the
call.
Integer
10
1 to 300