Yealink SIP T46G Administrator's Manual page 49

Administrator's Guide for SIP-T46G IP Phone
Several menu options are protected with two privilege levels, user and administrator,
each with its own password. When logging in the web user interface, you need to enter
the username and password for granting access to various menu options.
A user or an administrator can change the user password. IP phones support ASCII
characters 32-126(0x20-0x7E) only in passwords. A valid password should be complex
and contains at least 6 characters, where at least one character is numeric, and one
character is alphabetic.
Procedure
User password can be changed using the configuration files or locally.
Configuration File
Local
To change the user password via web user interface:
1. Click on Security.
2. Select user from the pull-down list of User Type.
3. Enter the new password in the New Password and Confirm Password fields.
4. Click Confirm to accept the change.
Note
If logging in the web user interface of the phone with the user credential, user needs to
enter the current user password in the Old Password field.
36
<y000000000028>.cfg
Web User Interface
Change the user password of the
IP phone.
For more information, refer to on
User Password page 242.
Change the user password of the
IP phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=security&q=load