Receiving Rtp Stream - Yealink SIP T46G Administrator's Manual

Administrator's Guide for SIP-T46G IP Phone
incoming multicast paging calls with higher priority are automatically answered and the
ones with lower priority are ignored.
Paging Priority Active
This parameter decides how the IP phone handles the incoming multicast paging calls,
when there is already a multicast paging call on the IP phone. If the parameter is
configured as disabled, the IP phone will automatically ignore all incoming multicast
paging calls. If the parameter is configured as enabled, an incoming multicast paging
call with higher priority is automatically answered, and the one with lower priority is
ignored.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
Local
To configure a listening multicast address via web user interface:
1. Click on Contacts->MulticastIP.
2. Enter the listening multicast address and port number in the Listening Address field.
1 is the highest priority and 10 is the lowest priority.
3. Enter the label in the Label field.
138
<y000000000028>.cfg
Web User Interface
Configure the listening multicast
address.
Configure the Paging Barge and
Paging Priority Active features.
For more information, refer to

Receiving RTP Stream

on page
307.
Configure the listening multicast
address.
Configure the Paging Barge and
Paging Priority Active features.
Navigate to:
http://<phoneIPAddress>/servlet
?p=contacts-multicastIP&q=load